Home › BODY ELECTRICAL › AUDIO / VISUAL › AMPLIFIER ANTENNA

AMPLIFIER ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Single Cab)


    B208915
  1. Attach the 2 claws to install the antenna with holder.

  1. Install the nut.

    Torque:
    4.5 N*m{ 45 kgf*cm , 39 in.*lbf }

  1. Attach the 3 clamps.

    NOTICE:
    Make sure the cable of the antenna passes behind pin A.



  1. Connect the connectors.


    B211290E01



2. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Double Cab)


    B208915
  1. Attach the 2 claws to install the antenna with holder.

  1. Install the nut.

    Torque:
    4.5 N*m{ 45 kgf*cm , 39 in.*lbf }

  1. Attach the 3 clamps.

    NOTICE:
    Make sure the cable of the antenna passes behind pin A.



  1. Connect the connectors.


    B211291E01



3. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Double Cab:

    1. Install the roof headlining (Click here).

  1. for Single Cab:

    1. Install the roof headlining (Click here).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).