RADIO ANTENNA CORD > INSTALLATION |
| 1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Single Cab) |
Attach the 6 clamps to install the antenna cord.
Connect the 4 connectors.

| 2. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Double Cab) |
w/ Roof Rail:
Attach the 10 clamps to install the antenna cord.
Connect the 4 connectors.

w/o Roof Rail:
Attach the 10 clamps to install the antenna cord.
Connect the 4 connectors.

| 3. INSTALL ROOF HEADLINING ASSEMBLY |
for Single Cab:
Install the roof headlining (Click here).
for Double Cab:
Install the roof headlining (Click here).
| 4. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD) |
w/o Roof Antenna:
Install the antenna cord with the 5 clamps as shown in the illustration.

Connect the connector.
w/ Roof Antenna:
Install the antenna cord with the clamp bolt.

Attach the 7 clamps.
Connect the connectors.
| 5. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD) |
w/ Roof Antenna:
Install the antenna cord with the clamp bolt.

Attach the 5 clamps.
Connect the connectors.
w/o Roof Antenna:
Install the antenna cord with the 4 clamps as shown in the illustration.

Connect the connector.
| 6. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY UPPER |
Install the instrument panel sub-assembly upper (Click here).
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |