Home › BODY ELECTRICAL › AUDIO / VISUAL › AMPLIFIER ANTENNA

AMPLIFIER ANTENNA > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE ROOF HEADLINING ASSEMBLY
  1. for Double Cab:

    1. Remove the roof headlining (Click here).

  1. for Single Cab:

    1. Remove the roof headlining (Click here).



3. REMOVE ANTENNA WITH HOLDER ASSEMBLY (for Single Cab)
  1. Disconnect the connectors.

  1. Detach the 3 clamps.



  1. Remove the nut.


    B210090



    B208915
  1. Detach the 2 claws and remove the antenna with holder.



4. REMOVE ANTENNA WITH HOLDER ASSEMBLY (for Double Cab)
  1. Disconnect the connectors.

  1. Detach the 3 clamps.



  1. Remove the nut.


    B210091



    B208915
  1. Detach the 2 claws and remove the antenna with holder.