Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA CORD

RADIO ANTENNA CORD > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Single Cab)
  1. Attach the 6 clamps to install the antenna cord.



  1. Connect the 4 connectors.


    B214308



2. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Double Cab)


  1. w/ Roof Rail:

    1. Attach the 10 clamps to install the antenna cord.



    2. Connect the 4 connectors.


      B214310



  1. w/o Roof Rail:

    1. Attach the 10 clamps to install the antenna cord.



    2. Connect the 4 connectors.


      B214309



3. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Single Cab:

    1. Install the roof headlining (Click here).

  1. for Double Cab:

    1. Install the roof headlining (Click here).



4. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)


  1. w/o Roof Antenna:



    1. Install the antenna cord with the 5 clamps as shown in the illustration.


      B115405E01

    2. Connect the connector.



  1. w/ Roof Antenna:



    1. Install the antenna cord with the clamp bolt.


      B210095

    2. Attach the 7 clamps.

    3. Connect the connectors.



5. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)


  1. w/ Roof Antenna:



    1. Install the antenna cord with the clamp bolt.


      B211229

    2. Attach the 5 clamps.

    3. Connect the connectors.



  1. w/o Roof Antenna:



    1. Install the antenna cord with the 4 clamps as shown in the illustration.


      B085617E01

    2. Connect the connector.



6. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY UPPER
  1. Install the instrument panel sub-assembly upper (Click here).



7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).