DTC C1203 ECM Communication Circuit Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1203 | The engine, drivetrain and destination variations that are sent from the ECM do not match the ones of the skid control ECU. | ECM |
| 1.CHECK PART NUMBER (ECM AND BRAKE ACTUATOR ASSEMBLY) |
Check that the proper ECM and brake actuator assembly are installed.
| Result | Proceed to |
| Proper ECUs are installed | A |
| Proper ECUs are not installed | B |
|
| ||||
| A | |
| 2.RECONFIRM DTC |
Clear the DTC (Click here).
Turn the ignition switch off.
Check if the same DTC is output.
| Result | Proceed to | |
| DTC is output | A | |
| DTC is not output | for 1GR-FE | B |
| for 1KD-FTV | C | |
| for 2KD-FTV | D | |
|
| ||||
|
| ||||
|
| ||||
| A | ||
| ||