CD Sound Skips
Circuit diagnosis · Vehicles built from Aug 2013
INSPECTION PROCEDURE
| 1. CHECK DISC |
Check that the disc is not deformed or cracked.

- OK:
- No deformation or cracks on the disc.
|
|
||||
| OK | |
| 2. CLEAN DISC AND RECHECK |
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

- NOTICE:
- Do not use a conventional record cleaner or antistatic preservative.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 3. REPLACE DISC AND RECHECK |
Replace the disc with a known good one.
Check that the malfunction disappears.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 4. CHECK NAVIGATION RECEIVER ASSEMBLY |
Check the navigation receiver assembly installation condition.
Check that the navigation receiver assembly is properly installed.
- OK:
- Navigation receiver assembly is properly installed.
|
|
||||
| OK | ||
| ||
