2014 Hilux · Service Manual CRUISE CONTROL SYSTEM

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from Jun 2011


CHECK INDICATOR
  1. Turn the ignition switch ON.

  2. BE04034E67
    Check that the cruise control indicator light illuminates when the cruise control main switch is turned on, and that the indicator light turns off when the main switch is turned off. If the results are not as specified, inspect the cruise control indicator light circuit (Click here).

    HINT:
    1. While driving with cruise control, the ECM activates AUTO CANCEL of the cruise control system when a malfunction in one of the following occurs: the vehicle speed sensors, stop light switch or other related parts. When AUTO CANCEL is activated, the cruise control indicator light outputs the illuminates in yellow. At the same time, data of the malfunction is stored as a DTC. (for 1KD-FTV [for DPF])
    2. While driving with cruise control, the ECM activates AUTO CANCEL of the cruise control system when a malfunction in one of the following occurs: the vehicle speed sensors, stop light switch or other related parts. When AUTO CANCEL is activated, the cruise control indicator light outputs the blinking pattern shown in the illustration. At the same time, data of the malfunction is stored as a DTC. (except 1KD-FTV [for DPF])

← TERMINALS OF ECU (from Jun 2011)DTC CHECK / CLEAR (from Jun 2011) →