2014 Hilux · Service Manual CRUISE CONTROL SYSTEM

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jun 2011


CHECK DTC (USING INTELLIGENT TESTER)
A098433E02
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the DTCs by following the directions on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC (USING INTELLIGENT TESTER)
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Erase the DTCs by following the directions on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEM (from Jun 2011)FAIL-SAFE CHART (from Jun 2011) →