Cellular Phone Inspection
Circuit diagnosis · Vehicles built from Aug 2013
INSPECTION PROCEDURE
- HINT:
- If the operation of a cellular phone or the radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| 1. CHECK USAGE CONDITION |
Check that the vehicle and cellular phone meet the following conditions:
- NOTICE:
- If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
- The cellular phone is "Bluetooth" compatible (Click here).
- The cellular phone is registered as a hands-free device.
- "Bluetooth" setting of the cellular phone is on.
- Operating system and software of the cellular phone are the latest versions.
- There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
- The cellular phone is "Bluetooth" compatible (Click here).
Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
- OK:
- The cellular phone is connected correctly.
|
|
||||
| OK | ||
| ||
| 2. RESTART CELLULAR PHONE |
Restart the cellular phone.
Turn the ignition switch off.
Turn the ignition switch to ACC.
Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
- OK:
- The cellular phone is connected correctly.
|
|
||||
| OK | ||
| ||
| 3. REGISTRATION AGAIN |
Check if the in-vehicle device can be recognized by the cellular phone.
- OK:
- In-vehicle device can be recognized
|
|
||||
| OK | |
| 4. REGISTRATION AGAIN |
Clear all "Bluetooth" devices registered to the cellular phone and radio and display receiver assembly.
Register the cellular phone again.
Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
- OK:
- The cellular phone is connected correctly.
|
|
||||
| OK | ||
| ||
| 5. CHECK USING ANOTHER VEHICLE |
Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
- HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- Make sure to obtain the customer's permission to perform this procedure.
- OK:
- The cellular phone is connected correctly.
|
|
||||
| OK | ||
| ||
| 6. CHECK USING ANOTHER CELLULAR PHONE |
Check if the system functions normally using another "Bluetooth" compatible cellular phone.
- HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- Make sure to obtain the customer's permission to perform this procedure.
- OK:
- The cellular phone is connected correctly.
|
|
||||
| OK | ||
| ||
