The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted
Circuit diagnosis · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013
INSPECTION PROCEDURE
- HINT:
- For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
| 1. CHECK CELLULAR PHONE |
 |
Check if the other caller can hear your voice properly.
- OK:
- Your voice can be heard correctly.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK SETTINGS |
 |
- Check if the mute is set to on.
- OK:
- Mute is not set to on.
Text in Illustration
*a
|
Example
|
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CHECK MICROPHONE |
 |
- Enter "Microphone & Voice Recognition Check" (Check Mic & Voice Recognition) (Click here).
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
|
|