2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

A108624E01
  1. Partially soak the sensor in the water and warm up the water.

  1. Measure the resistance between the terminals.

    Standard resistance:
    Condition
    Specified Condition
    Approx. 20°C (68°F)
    2.32 to 2.59 kΩ
    Approx. 80°C (176°F)
    0.310 to 0.326 kΩ

    If the result is not as specified, replace the sensor.

    NOTICE:
    When checking the sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →