2014 Hilux · Service Manual RESTRAINTS

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2013 from Aug 2013

HINT:
  1. Use these procedures to troubleshoot the supplemental restraint system.
  1. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.CHECK FOR DTC*
    1. Check for DTC and note any codes that are output.

    2. Delete the DTC.

    3. Recheck for DTC.

      Result:
      Result
      Proceed to
      DTC does not reoccur
      A
      DTC reoccurs
      B


    B.
    A

    4.PROBLEM SYMPTOMS TABLE

      Result:
      Result
      Proceed to
      Fault is not listed in problem symptoms table
      A
      Fault is listed in problem symptoms table
      B


    B.
    A

    5.OVERALL ANALYSIS AND TROUBLESHOOTING
    1. On-vehicle inspection (Click here), (Click here), (Click here).

    2. Terminals of ECU (Click here).

    NEXT

    6.REPAIR OR REPLACE
      NEXT

      7.CONFIRMATION TEST
        NEXT

        ← HOW TO PROCEED WITH TROUBLESHOOTING (Jun 2011 – Jul 2013)PROBLEM SYMPTOMS TABLE (Jun 2011 – Jul 2013) →