INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. INSTALL REAR SEAT ASSEMBLY |
Fold up the rear seat cushion assembly.
Place the rear seat assembly in the cabin.

- NOTICE:
- Be careful not to damage the vehicle body.
Attach the 2 hooks and 2 guides.
Text in Illustration *1
Hook
*2
Guide
Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.
Temporarily install the rear seat assembly with the 4 bolts.
Tighten the 4 bolts in the order shown in the illustration.
- Torque:
- 20 N*m{ 199 kgf*cm , 14 ft.*lbf }
Pass the 2 rear No. 1 seat inner belts through the 2 seat cushion rubber bands.

Text in Illustration *1
Seat Cushion Rubber Band
Return the seat cushion to its original position to lock the seat cushion lock.

Attach the fold seat stopper band button.
Text in Illustration *1
Fold Seat Stopper Band Button
| 2. INSTALL REAR SEAT HINGE COVER LH |
Attach the guide.

Push the rear seat hinge cover LH to attach the 2 claws and install the rear seat hinge cover LH.
| 3. INSTALL REAR SEAT HINGE COVER RH |
- HINT:
- Use the same procedures described for the LH side.
