REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE FRONT SEAT ASSEMBLY RH |
for Separate Seat Type:
Remove the front seat assembly RH (Click here).
w/ Front Seat Side Airbag:
Remove the front seat assembly RH (Click here).
for Bench Seat Type:
Remove the front seat assembly RH (Click here).
for Power Seat:
Remove the front seat assembly RH (Click here).
| 3. REMOVE FLOOR CARPET COVER |
Detach the 4 claws and remove the floor carpet cover.

| 4. REMOVE SENSOR BRACKET |
Remove the 2 bolts and sensor bracket.
| 5. REMOVE DECELERATION SENSOR |
Disconnect the deceleration sensor connector.

Remove the deceleration sensor.
