2014 Hilux · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


3. REMOVE BRAKE ACTUATOR ASSEMBLY

  1. C188007E01
    Use tags or make a note to identify the reconnection locations.

  1. C242471
    Release the latch of the actuator connector and disconnect the connector.

  1. Using a union nut wrench, disconnect the 6 brake lines from the actuator.

  1. Remove the 3 nuts and actuator with bracket.

    NOTICE:
    C188009
    Be careful not to damage the brake tubes.

← REMOVAL (Jun 2011 – Jul 2012)REMOVAL (from Aug 2013) →