2014 Hilux · Service Manual SUSPENSION & AXLE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2011


CHECK FRONT AXLE HUB BEARING

F042746E01
  1. Remove the front wheel.

  1. Remove the front disc brake cylinder (Click here).

  1. Remove the front disc.

  1. Inspect the axle hub backlash.

    1. Using a dial indicator, check the backlash near the center of the axle hub.

      Maximum backlash:
      0.05 mm (0.0020 in.)

      If the backlash is greater than the maximum, replace the bearing.

  1. F042745E01
    Inspect the axle hub deviation.

    1. Using a dial indicator, check the deviation at the surface of the axle hub.

      Maximum deviation:
      0.05 mm (0.0020 in.)

      If the deviation is greater than the maximum, replace the bearing.

← COMPONENTS (from Jun 2011)REMOVAL (from Jun 2011) →