REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY |
TSAM made:
Remove the propeller shaft with center bearing assembly (Click here).
TMT made:
Remove the propeller shaft with center bearing assembly (Click here).
| 2. DRAIN AUTOMATIC TRANSMISSION FLUID |
Remove the drain plug, gasket and drain ATF.
Install a new gasket and the drain plug.
- Torque:
- 28 N*m{ 285 kgf*cm , 21 ft.*lbf }
| 3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL |
![]() ![]() |
Using SST, remove the oil seal.
- SST
- 09308-00010


