2014 Hilux · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Jun 2011


1. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL

D028698E01
  1. Coat the lip of the oil seal with MP grease.

  1. Using SST and a hammer, carefully tap in a new oil seal in as far as possible.

    SST
    09316-60011   (09316-00011, 09316-00051)

    Oil seal depth from flat end:
    5.4 to 5.8 mm (0.213 to 0.228 in.)


2. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
  1. TSAM made:
    Install the propeller shaft with center bearing assembly (Click here).

  1. TMT made:
    Install the propeller shaft with center bearing assembly (Click here).


3. ADD AUTOMATIC TRANSMISSION FLUID
  1. Add automatic transmission fluid (Click here).


4. INSPECT AUTOMATIC TRANSMISSION FLUID
  1. Inspect the automatic transmission fluid (Click here).

← REMOVAL (from Jun 2011)COMPONENTS (from Jun 2011) →