2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL NO. 2 ECM BRACKET

  1. A191417
    for LHD:
    Install the bracket with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. A224464
    for RHD:
    Install the bracket with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


2. INSTALL NO. 1 ECM BRACKET

  1. A191416
    for LHD:
    Install the bracket with the 3 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. A224463
    for RHD:
    Install the bracket with the 3 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


3. INSTALL ECM

  1. A191421E03
    Install the ECM with the bolt and 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 4 connectors.


4. INSTALL TURBO MOTOR DRIVER (for Motor Controlled Actuator)

  1. A191420E03
    Install the turbo motor driver with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the connector.


5. INSTALL 4WD CONTROL ECU (for 4WD)

  1. A211934E02
    Install the 4WD control ECU with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the connector.


6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

B278068E01
  1. Attach the 2 hinges to install the glove compartment door.

    Text in Illustration 
    *1
    Hinge

  1. B278069E01
    While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
    Text in Illustration 
    *1
    Stopper


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


8. PERFORM REGISTRATION (w/ EGR Cooler)
  1. Perform registration (Click here).


9. PERFORM REGISTRATION (w/o EGR Cooler)
  1. Perform registration (Click here).


10. START ENGINE (w/ EGR Cooler)

NOTICE:
After replacing the ECM, the new ECM needs to be initialized (Click here).


11. START ENGINE (w/o EGR Cooler)

NOTICE:
After replacing the ECM, the new ECM needs to be initialized (Click here).

← REMOVAL (from Aug 2013)INSTALLATION (Aug 2012 – Jul 2013) →