REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE V-BANK COVER |
Remove 2 nuts and cover.
| 3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
![]() ![]() |
Disconnect the sensor connector.
Using SST, remove the sensor from the exhaust manifold.
- SST
- 09224-00010
| 4. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) |
![]() ![]() |
Disconnect the sensor connector.
Using SST, remove the sensor from the exhaust manifold.
- SST
- 09224-00010



