INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL WITH HOLDER ANTENNA ASSEMBLY |
Install the antenna as shown in the illustration.

Text in Illustration *a
LHD only
- HINT:
- Stow the antenna pole before installing the antenna.
for RHD:
Install the 2 screws.
for LHD:
Attach the clamp and install the screws.
Connect the connector.
| 2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 4. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).
