2014 Hilux · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 from Aug 2012


1. REMOVE RADIATOR BRACKET SUB-ASSEMBLY

  1. A099949E02
    Remove the 4 bolts and 2 brackets.


2. REMOVE RADIATOR DRAIN COCK PLUG
  1. Remove the drain plug.

  1. Remove the O-ring.


3. ASSEMBLE SST

  1. A113337E07
    Install the claw to part A of the overhaul handle as shown in the illustration.
    SST
    09230-01010   (09231-01010, 09231-01030)

  1. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

    Dimension B:
    0.2 to 0.3 mm (0.008 to 0.012 in.)

    NOTICE:
    If this adjustment is not performed, the claw will be damaged.


4. UNCAULK LOCK PLATE

  1. A113338E01
    Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.
    SST
    09230-01010   (09231-01010, 09231-01030)


5. REMOVE RADIATOR TANK UPPER AND TANK LOWER

  1. A099688E01
    Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tank.

  1. Remove the O-ring.

← REMOVAL (from Aug 2012)DISASSEMBLY (from Aug 2012) →