DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
MOUNT INJECTION PUMP |
 |
- Mount the injection pump to SST.
- SST
- 09241-76022
09245-54010
| 2.
REMOVE NO. 4 NOZZLE LEAKAGE PIPE |
 |
- Remove the overflow screw, nozzle leakage pipe and 2 washers.
| 3.
REMOVE FUEL FILTER TO INJECTION PUMP FUEL PIPE |
 |
Remove the cap nut, fuel pipe and 2 washers.
Remove the fuel inlet hollow screw and washer.
| 4.
REMOVE TIMING CONTROL VALVE |
 |
- Using a 5 mm hexagon wrench, remove the 2 bolts and timing control valve.
| 5.
REMOVE FUEL TEMPERATURE SENSOR |
 |
- Using a 19 mm deep socket wrench, remove the fuel temperature sensor.
| 6.
REMOVE DISTRIBUTIVE HEAD PLUG |
 |
- Using SST, remove the distributive head plug.
- SST
- 09260-54012
(09262-54010)
| 7.
REMOVE DELIVERY VALVE |
 |
- Using SST, remove the 4 delivery valve holders and springs.
- SST
- 09260-54012
(09269-54020)
Remove the 4 delivery valves and gaskets.
- NOTICE:
- Do not touch the sliding surfaces of the delivery valve with your hand.
- HINT:
- Arrange the delivery valves, springs, and holders in the order they were removed.