32 (1)
|
- When ignition switch is turned ON, or when ECM determines if there is error in RAM of ECM, ECM conducts single communication. If one of following conditions occurs in single communication, ECM conducts another communication. While ECM is conducting communication, ECM detects DTC 32 (1) if (a) occurs 20 times continuously, (b) occurs 20 times continuously, or (c) occurs 2 times continuously.
- (a) There was communication error when receiving data.
- (b) Data sent from injection pump correction unit does not match data received in ECM.
- (c) Data received from pump ROM is not input for 1024 msec.
- HINT:
- Even when determining process is completed normally, if undefined code is found while checking identification code of data received, ECM conducts communication again. If undefined code occurs 20 times continuously, ECM detects DTC 32 (1).
|
- Open or short in injection pump correction unit circuit
- Injection pump correction unit
- ECM
|