2014 Hilux · Service Manual DRIVE LINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT FRONT PROPELLER SHAFT ASSEMBLY

F052087E01
  1. Using a dial indicator, measure the propeller shaft runout.

    Maximum runout:
    0.8 mm (0.03 in.)

    If the runout is greater than the maximum, replace the propeller shaft.


INSPECT UNIVERSAL JOINT SPIDER ASSEMBLY
  1. Check the spider bearings for wear or damage.

  1. Check each spider bearing's axial play by turning the yoke while holding the shaft tightly.

    Maximum bearing axial play:
    0.05 mm (0.0020 in.)

    If the axial play is greater than the maximum, replace the spider bearing.

← DISASSEMBLY (from Jun 2011)REASSEMBLY (from Jun 2011) →