INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR) |
w/ Intercooler:
Install the electric vacuum regulating valve with bracket with the 2 bolts.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Connect the 4 vacuum hoses.
- NOTICE:
- Install the vacuum hoses so that they completely cover the pipes.
Connect the electric vacuum regulating valve connector.
w/o Intercooler:
Install the electric vacuum regulating valve together with the bracket with the 2 bolts.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Connect the 2 vacuum hoses.
Connect the electric vacuum regulating valve connector.
| 2. INSTALL NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ Intercooler) |
Install the No. 1 gas filter with gas filter bracket with the bolt.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Connect the 2 vacuum hoses.
- NOTICE:
- Install the vacuum hoses so that they completely cover the pipes.
| 3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler) |
- w/ Intercooler: (Click here)
- w/o Intercooler: (Click here)
