REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- CAUTION:
- Some of these service operations affect the SRS. Read the precautionary notices concerning the SRS before servicing (Click here).
| 1.
PLACE FRONT WHEELS FACING STRAIGHT AHEAD |
|
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3.
REMOVE STEERING PAD ASSEMBLY |
 |
(Click here)
| 4.
REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display) |
 |
- Disconnect the connectors and detach the 2 clamps.
Text in Illustration
*1
|
Pin
|
*2
|
Clamp
|
Remove the 2 screws.
Detach the 4 pins and remove the steering pad switch.
| 5.
REMOVE STEERING PAD SWITCH LH (w/o Multi-information Display) |
 |
- HINT:
- Refer to the step "REMOVE STEERING PAD SWITCH ASSEMBLY".