INSTALLATION
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL CONSOLE BOX ASSEMBLY |
![]() ![]() |
Install the console box with the 4 screws and 2 bolts.
Install the 2 clips.
Text in Illustration *1
Screw
*2
Bolt
*3
Clip
| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) |
Attach the 12 claws to install the upper console panel.


Text in Illustration *A
for 2WD
*B
for 4WD
| 3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) |
Attach the 12 claws to install the upper console panel.


Text in Illustration *A
for 2WD
*B
for 4WD
| 4. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Attach the 4 claws to install the parking brake hole cover.
| 5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission, for 4WD) |
![]() ![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
![]() ![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.



