REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE ROOF HEADLINING ASSEMBLY |
for Single Cab:
(Click here).
for Extra Cab:
(Click here).
for Double Cab:
(Click here).
| 2. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Single Cab) |
Disconnect the connector.

- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 7 bolts.


Detach the 6 claws (labeled A).


Using a moulding remover B, detach the 2 claws (labeled B) and remove the curtain shield airbag assembly LH.
| 3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Extra Cab) |
Disconnect the connector.

- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 8 bolts.


Detach the 8 claws (labeled A).


Using a moulding remover B, detach the 2 claws (labeled B) and remove the curtain shield airbag assembly LH.
| 4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Double Cab) |
Disconnect the connector.

- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 9 bolts.


Detach the 9 claws and remove the curtain shield airbag assembly LH.


