2014 Hilux · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE ROOF HEADLINING ASSEMBLY
  1. for Single Cab:
    (Click here).

  1. for Extra Cab:
    (Click here).

  1. for Double Cab:
    (Click here).


2. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Single Cab)

  1. B211465
    Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Remove the 7 bolts.

    B287632

  1. Detach the 6 claws (labeled A).

    B287634E01

  1. Using a moulding remover B, detach the 2 claws (labeled B) and remove the curtain shield airbag assembly LH.


3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Extra Cab)

  1. B211465
    Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Remove the 8 bolts.

    B287639

  1. Detach the 8 claws (labeled A).

    B287643E01

  1. Using a moulding remover B, detach the 2 claws (labeled B) and remove the curtain shield airbag assembly LH.


4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for Double Cab)

  1. B211465
    Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Remove the 9 bolts.

    B287644

  1. Detach the 9 claws and remove the curtain shield airbag assembly LH.

    B287645

← REMOVAL (Aug 2012 – Jul 2013)INSTALLATION (Jun 2011 – Jul 2012) →