REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE ROOF HEADLINING ASSEMBLY |
for Double Cab:
(Click here)
for Single Cab:
(Click here)
| 3. REMOVE ANTENNA WITH HOLDER ASSEMBLY (for Single Cab) |
Disconnect the connector.
Detach the 3 clamps.
Remove the nut.


Detach the 2 claws and remove the antenna with holder.

| 4. REMOVE ANTENNA WITH HOLDER ASSEMBLY (for Double Cab) |
Disconnect the connector.
Detach the 3 clamps.
Remove the nut.


Detach the 2 claws and remove the antenna with holder.

