INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Single Cab) |
Attach the 5 clamps to install the antenna cord.
Connect the 2 connectors.


| 2. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Double Cab) |
w/o Roof Rail:
Attach the 9 clamps to install the antenna cord.
Connect the 2 connectors.


| 3. INSTALL ROOF HEADLINING ASSEMBLY |
for Single Cab:
(Click here)
for Double Cab:
(Click here)
| 4. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD) |
w/o Roof Antenna:
Attach the 4 clamps shown in the illustration to install the antenna cord.


Connect the connector.
w/ Roof Antenna:
Install the antenna cord with the clamp bolt.


Attach the 6 clamps.
Connect the connector.
| 5. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD) |
w/ Roof Antenna:
Install the antenna cord with the clamp bolt.


Attach the 4 clamps.
Connect the connectors.
w/o Roof Antenna:
Install the antenna cord with the 4 clamps as shown in the illustration.


Connect the connector.
| 6. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
