REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
| 3. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD) |
w/o Roof Antenna:
Disconnect the connector.


Detach the 4 clamps as shown in the illustration. Then remove the antenna cord.
w/ Roof Antenna:
Disconnect the connectors.


Detach the 5 clamps shown in the illustration.
Remove the clamp bolt and antenna cord.
| 4. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD) |
w/o Roof Antenna:
Disconnect the connector.


Detach the 4 clamps as shown in the illustration. Then remove the antenna cord.
w/ Roof Antenna:
Disconnect the connectors.


Detach the 4 clamps shown in the illustration.
Remove the clamp bolt and antenna cord.
| 5. REMOVE ROOF HEADLINING ASSEMBLY |
for Single Cab:
(Click here)
for Double Cab:
(Click here)
| 6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Single Cab) |
Disconnect the 2 connectors.
Detach the 5 clamps and remove the antenna cord.


| 7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Double Cab) |
Disconnect the 2 connectors.


Detach the 8 clamps and remove the antenna cord.
