REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
| 2. REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR |
Remove the 3 nuts and No. 1 front floor heat insulator.

| 3. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY |
![]() ![]() |
for 4WD:
Disconnect the connector.
for Pre-Runner:
Disconnect the connector.
Remove the bolt and sensor bracket.
Text in Illustration *A
for 4WD
*B
for Pre-Runner
Remove the nut and differential pressure sensor from the sensor bracket.

Remove the No. 6 exhaust pipe air hose and No. 7 exhaust pipe air hose from the differential pressure sensor.


