The data stored on the USB device or "iPod" may be changed or lost due to malfunctions, repairs, system errors, etc. Therefore, when repairs are to be performed, explain this to the customer and obtain their consent prior to performing repairs.
HINT:
After the inspection is completed, clear the DTCs.
1. CHECK USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
HINT:
Refer to System Description for playable files (Click here).
When one of these DTCs has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the stereo jack adapter assembly.