B158C SD Card Communication Malfunction
Diagnostic trouble codes · Vehicles built from Aug 2013
DESCRIPTION
The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the SD card slot.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B158C |
The SD card cannot be mounted when inserted into the SD card slot. |
|
INSPECTION PROCEDURE
| 1. CHECK SD CARD |
Turn the ignition switch off and remove the SD card from the SD card slot.
Check that the SD card is not damaged.
- OK:
- The SD card is not damaged.
|
|
||||
| OK | |
| 2. CLEAN COMPONENTS |
Check that the terminals of the SD card are free of foreign matter. Remove foreign matter as necessary.
Check that the SD card slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.
Insert the SD card into the SD card slot.
| NEXT | |
| 3. CHECK FOR DTC |
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output (Click here).
- OK:
- No DTCs are output.
|
|
||||
| OK | ||
| ||
| 4. REPLACE SD CARD |
Replace the SD card.
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output (Click here).
- OK:
- No DTCs are output.
|
|
||||
| OK | ||
| ||
