Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM1840EF _51 Engine / Hybrid System _009575 2TR-FE ENGINE MECHANICAL _0052187 FRONT CRANKSHAFT OIL SEAL A

2TR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.
A170255N03
1.771,1.052 1.177,0.188 1.177,0.188 2.208,0.448 false 1.115,2.552 1.646,2.906 1.646,2.906 1.479,2.5 false 0.865,0.115 1.344,0.365 0.479,0.25 10 false SST 1.604,2.958 2,3.167 0.396,0.208 10 false SST

Apply MP grease to the lip of a new oil seal.

NOTICE:
·

Do not allow foreign matter to contact the lip of the oil seal.

·

Do not allow MP grease to contact the dust seal.




b.

Temporarily install the oil seal to the timing chain cover.


c.

Using SST and a hammer, tap in the oil seal until its surface is flush with the chain cover edge.

SST
09223-75010  
09950-70010  (09951-07100)

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not tap the oil seal at an angle.