Home › Engine / Hybrid System › 2TR-FBE FUEL › FUEL SUB TANK › 2012.04–2012.10
RM1840EF _51 Engine / Hybrid System _009581 2TR-FBE FUEL _0052260 FUEL SUB TANK A

2TR-FBE FUEL  FUEL SUB TANK  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 3.REMOVE AUXILIARY FUEL TANK ASSEMBLY

a.
A241609

Disconnect the connector and No. 3 fuel hose.


b.
A237770

Disconnect the fuel sender gauge connector.


c.
A237775

Disconnect the No. 4 fuel hose.


d.
A237771

Disconnect the fuel pump connector.


e.
A237772

Disconnect the No. 2 fuel tank filler tube.


f.
A237776

Remove the 2 bolts and auxiliary fuel tank assembly.

NOTICE:
·

Do not drop the auxiliary fuel tank.

·

Do not damage the piping or wiring.




Hide 4.REMOVE SOLENOID VALVE ASSEMBLY

a.
A241610

Disconnect the hose.


b.

Remove the bolt and solenoid valve assembly.


Hide 5.REMOVE FUEL TANK FILLER PIPE SUPPORT

a.
A239223

Remove the No. 1 fuel tank filler pipe support and No. 2 fuel tank filler pipe support.


Hide 6.REMOVE FUEL TANK CAP ASSEMBLY

Hide 7.REMOVE FUEL TANK CAP COVER

a.
A239225

Remove the tie wrap and fuel tank cap cover.


Hide 8.DRAIN FUEL

Hide 13.REMOVE FUEL TANK FILLER PIPE

a.
A241614

Loosen the hose clamp, then remove the fuel tank filler pipe.


Hide 14.REMOVE BREATHER TUBE FUEL HOSE

a.
A241615

Loosen the hose clamp, then remove the breather tube fuel hose from the fuel tank sub-assembly.