Home › Engine / Hybrid System › 2KD-FTV EMISSION CONTROL › VACUUM REGULATING VALVE
RM1840EF _51 Engine / Hybrid System _009583 2KD-FTV EMISSION CONTROL _0052276 VACUUM REGULATING VALVE A

2KD-FTV EMISSION CONTROL  VACUUM REGULATING VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)

a.

Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

w/ EGR Cooler:

Connect the 4 vacuum hoses.

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.



c.

w/o EGR Cooler:

Connect the 2 vacuum hoses.

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.



d.

Connect the connector.


Hide 2.INSTALL NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ EGR Cooler)

a.

Install the No. 1 gas filter with gas filter bracket with the bolt.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

Connect the 2 vacuum hoses.

NOTICE:

Install the vacuum hoses so that they completely cover the pipes.



Hide 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ EGR Cooler)

Hide 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/o EGR Cooler)