Home › Engine / Hybrid System › 2TR-FBE COOLING › WATER PUMP › 2011.10–2012.10
RM1840EF _51 Engine / Hybrid System _009596 2TR-FBE COOLING _0052378 WATER PUMP A

2TR-FBE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ENGINE WATER PUMP ASSEMBLY

A253976
1.177,0.792 1.188,0.885 false
V100135

Bolt A
V100136

Bolt B


a.

Install a new gasket and the engine water pump assembly with the 10 bolts.

Torque:
for bolt A : 26 N*m (265 kgf*cm, 19 ft.*lbf)
for bolt B : 13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

A253977
1.594,0.604 1.677,0.573 false
V100135

Bolt A
V100136

Bolt B
V100137

Bolt C


a.

Temporarily install the belt tensioner with the 3 bolts.

HINT:

Make sure the flanges of the bolts are contacting the tensioner surface.



b.

Install the tensioner with the 3 bolts.

Torque:
for bolt A : 43 N*m (438 kgf*cm, 32 ft.*lbf)
for bolt B : 40 N*m (408 kgf*cm, 30 ft.*lbf)
for bolt C : 21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 3.INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY

A254386
2.979,1.323 2.5,0.969 2.5,0.969 2.323,0.969 false 2.698,1.896 2.531,2.448 2.531,2.448 2.417,2.448 false 2.115,0.885 2.313,1.052 0.198,0.167 10 *1 2.219,2.354 2.417,2.521 0.198,0.167 10 *2
*1 Spacer
*2 Pulley


a.

Install the spacer and pulley with the bolt.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


Hide 4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Install a new O-ring.


b.

Install the engine oil level dipstick guide with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Install the engine oil level dipstick.


Hide 7.CONNECT AIR PUMP INLET

a.

Connect the air pump inlet to the radiator with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)