Home › Engine / Hybrid System › 1GR-FE LUBRICATION › ENGINE OIL COOLER › from 2012.04
RM1840EF _51 Engine / Hybrid System _009602 1GR-FE LUBRICATION _0052412 ENGINE OIL COOLER A

1GR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL OIL COOLER ASSEMBLY

a.

Clean the contact surfaces of the oil filter bracket and oil cooler.


b.

Place a new O-ring on the oil cooler.


c.

Apply a light coat of engine oil to the threads of the union bolt.


d.
A076453
2.271,1.927 2.042,1.927 2.042,1.927 1.781,1.333 true 1.375,0.448 1.563,0.448 1.563,0.448 1.844,1.219 true 2.354,1.823 2.552,2 0.198,0.177 10 false *1 1.156,0.344 1.333,0.521 0.177,0.177 10 false *2
*1 Protrusion
*2 Cutout


Align the protrusion of the oil filter bracket with the cutout of the oil cooler.


e.

Install the oil cooler and plate washer with the union bolt.

Torque:
68 N*m (693 kgf*cm, 50 ft.*lbf)


f.

Connect the 2 hoses to the oil cooler.