1.INSTALL GLOW PLUG ASSEMBLY
Using a 12 mm deep socket wrench, install the 4 glow plugs.
2.INSTALL NO. 1 GLOW PLUG CONNECTOR
Install the glow plug connector by uniformly tightening the 4 nuts.
Install the 4 screw grommets.
Install the wire harness with the nut.
3.INSTALL INTAKE AIR CONNECTOR (w/o EGR System)
4.INSTALL NO. 2 INTAKE AIR CONNECTOR BRACKET (w/o EGR System)
5.INSTALL VACUUM SWITCHING VALVE BRACKET (w/o EGR System)
6.INSTALL DIESEL THROTTLE BODY ASSEMBLY (w/o EGR System)
7.INSTALL EGR VALVE ASSEMBLY