Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
1.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
Install a new brake drum gasket and rear brake drum.
2.BLEED BRAKE LINE (w/ VSC)
3.BLEED BRAKE LINE (for TASA Made)
4.BLEED BRAKE LINE (for TMT Made)
5.BLEED CLUTCH LINE (for Manual Transmission)
6.INSTALL REAR WHEEL
7.CHECK PARKING BRAKE LEVER TRAVEL
8.ADJUST PARKING BRAKE LEVER TRAVEL