Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR › 2012.10–2013.10
RM1840EF _58 Vehicle Interior _009647 SEAT BELT _0052731 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER RH

a.

Using hog ring pliers, install the separate type front seat cushion cover RH to the seat cushion pad with new hog rings.

B278517
6.208,0.25 6.094,0.25 false 6.094,0.25 6.01,0.698 false 0.521,0.125 0.74,0.292 0.219,0.167 10 false *A 3.365,0.125 3.583,0.292 0.219,0.167 10 false *B 6.229,0.146 6.427,0.313 0.198,0.167 10 false *1
*A for Vinyl Seat, for Cloth Seat *B for Leather Seat
*1 Hog Ring Pliers - -


NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.




b.

Attach the hooks to install the separate type front seat cushion cover with pad to the front seat cushion frame sub-assembly RH.


c.
B276735

Bend the 2 front seat cushion frame claws downward.


d.
B276732
1.865,2.479 1.75,2.479 1.75,2.479 1.625,3.146 false 1.896,2.375 2.104,2.531 0.208,0.156 10 false *1
*1 Hog Ring Pliers


Using hog ring pliers, install the separate type front seat cushion cover to the front cushion frame sub-assembly RH with new hog rings.


e.
B276733

Attach the wire harness clamp.


Hide 2.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY RH

a.

Install the separate type front seatback assembly RH with the 4 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 3.INSTALL SEATBACK SPRING RH

a.

Install the seatback spring RH.


Hide 4.INSTALL FRONT SEAT CUSHION SHIELD RH

B276713
2.802,1.052 2.698,1.052 false 2.698,1.052 2.51,1.375 false 1.438,0.26 1.344,0.26 false 1.344,0.26 1.042,1.25 false 1.344,0.26 1.521,0.771 false 2.875,0.948 3.063,1.115 0.188,0.167 10 false *1 1.5,0.167 1.688,0.333 0.188,0.167 10 false *2 1.531,1.271 1.802,1.438 0.271,0.167 10 false (1) 0.573,1.313 0.885,1.51 0.313,0.198 10 false (2)
*1 Guide
*2 Hook


a.

Attach the guide, and then attach the 2 hooks in the order shown in the illustration to install the front seat cushion shield RH.


b.

Install the 2 screws.


Hide 5.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

a.
B277632

Attach the claw to install the reclining adjuster release handle RH.


Hide 6.INSTALL FRONT SEAT INNER CUSHION SHIELD RH

B276709
1.384,0.934 1.576,1.086 0.193,0.152 10 (1) 2.303,1.269 2.496,1.421 0.193,0.152 10 (2)

a.

Attach the 2 hooks in the order shown in the illustration to install the front seat cushion shield RH.


b.

Install the 2 screws.


Hide 7.INSTALL FRONT SEAT CUSHION COVER RH

a.

Install the front seat cushion cover RH.