Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab) › 2012.01–2012.04
RM1840EF _58 Vehicle Interior _009647 SEAT BELT _0052735 FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab) A

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).



PROCEDURE

Hide 1.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH

B342502

a.

Align the outer belt positioning holes with the claws and install the retractor of the front seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Install the front seat outer belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.
B278424

Close the cover and attach the 2 claws.


Hide 2.INSTALL LOWER QUARTER TRIM PANEL LH

a.

Attach the 3 clips, claw and 2 guides to install the lower quarter trim panel LH.


b.

Install the front seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)