Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for 1GR-FE) › 2012.04–2012.10
RM1840EF _58 Vehicle Interior _009648 HEATING / AIR CONDITIONING _0052767 CONDENSER(for 1GR-FE) A

HEATING / AIR CONDITIONING  CONDENSER(for 1GR-FE)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL COOLER CONDENSER ASSEMBLY

E232876

a.

Install the cooler condenser assembly.


Hide 2.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

E233382
1.344,0.167 1.479,0.333 0.135,0.167 10 false B 0.938,0.156 1.073,0.323 0.135,0.167 10 false A 2.677,0.104 2.813,0.271 0.135,0.167 10 false A 1.177,0.833 1.313,1 0.135,0.167 10 false A 2.979,0.51 3.115,0.677 0.135,0.167 10 false A 2.219,0.115 2.354,0.281 0.135,0.167 10 false B 2.083,0.708 2.25,0.875 0.167,0.167 10 true C

a.

Install the upper radiator support sub-assembly with the 7 bolts.

Torque:
for bolt A : 5.5 N*m (56 kgf*cm, 49 in.*lbf)
for bolt B : 5.4 N*m (55 kgf*cm, 48 in.*lbf)
for bolt C : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 4.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.

Remove the vinyl tape attached to the air conditioning tube and accessory assembly and connecting part of the cooler condenser.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioning tube and accessory assembly joint.

Compressor oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the air conditioning tube and accessory assembly.


d.

Install the air conditioning tube and accessory assembly to the cooler condenser with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 5.INSTALL NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.

Remove the vinyl tape attached to the No. 1 cooler refrigerant discharge hose and connecting part of the cooler condenser.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose joint.

Compressor oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the No. 1 cooler refrigerant discharge hose.


d.

Install the No. 1 cooler refrigerant discharge hose to the cooler condenser with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)