Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for Double Cab) › 2012.04–2012.10
RM1840EF _58 Vehicle Interior _009650 INTERIOR PANELS / TRIM _0052776 ROOF HEADLINING(for Double Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Double Cab)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 3 SIDE RAIL SPACER LH

a.

Attach the 3 claws to install the rear No. 3 side rail spacer.


Hide 2.INSTALL REAR NO. 3 SIDE RAIL SPACER RH

HINT:

Use the same procedure described for the LH side.


Hide 3.INSTALL REAR NO. 2 SIDE RAIL SPACER LH

HINT:

Use the same procedure for both rear No. 2 side rail spacers.


a.

Attach the 2 claws to install the rear No. 2 side rail spacer.


Hide 4.INSTALL REAR NO. 2 SIDE RAIL SPACER RH

HINT:

Use the same procedure described for the LH side.


Hide 5.INSTALL SIDE RAIL SPACER

a.

Attach the 2 claws to install the side rail spacer.


Hide 6.INSTALL FRONT SIDE RAIL SPACER LH

a.

Attach the 2 claws to install the front side rail spacer.


Hide 7.INSTALL FRONT SIDE RAIL SPACER RH

HINT:

Use the same procedure described for the LH side.


Hide 8.INSTALL ROOF HEADLINING ASSEMBLY

B276991

a.

Place the roof headlining into the vehicle as shown in the illustration.

NOTICE:

Be careful not to damage the roof headlining when placing it.



b.
B288744
1.552,1.969 1.469,1.552 1.469,1.552 1.354,1.552 false 1.646,2.135 1.719,2.563 true 2.542,2.24 2.406,2.74 true 2.51,2.042 2.417,1.771 2.417,1.771 2.521,1.771 false 2.281,2.76 2.49,2.927 0.208,0.167 10 false *A 2.542,1.677 2.75,1.844 0.208,0.167 10 false *A 1.625,2.583 1.833,2.75 0.208,0.167 10 false *A 1.167,1.448 1.375,1.615 0.208,0.167 10 false *A
*A w/o Assist Grip


Install the roof headlining with the clips.


c.

Connect the connectors and attach the 4 clamps.


d.

Attach the 5 clamps to the front pillar LH.


Hide 10.INSTALL DEFROSTER NOZZLE ASSEMBLY (w/ Defroster)

Hide 14.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Hide 15.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 16.INSTALL ASSIST GRIP

HINT:

Use the same procedure for all assist grips.


a.

Install the assist grip with the 2 screws.


b.

Attach the 4 claws to close the 2 covers.


Hide 17.INSTALL VISOR HOLDER LH

a.

Attach the 2 claws to install the visor holder.


b.

Install the screw.


Hide 18.INSTALL VISOR HOLDER RH

HINT:

Use the same procedure described for the LH side.


Hide 19.INSTALL VISOR ASSEMBLY LH

a.

Install the visor with the 2 screws.


b.

Attach the guide.


Hide 20.INSTALL VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 21.INSTALL NO. 1 ROOM LIGHT ASSEMBLY

Hide 23.INSTALL QUARTER INSIDE TRIM BOARD LH

a.

Attach the 4 clips to install the quarter inside trim board.


b.

Connect the front seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Attach the 2 claws to close the front seat belt shoulder anchor cover.


Hide 24.INSTALL QUARTER INSIDE TRIM BOARD RH

HINT:

Use the same procedure described for the LH side.


Hide 25.INSTALL LOWER QUARTER TRIM PANEL LH

a.

Attach the 3 clips and claw to install the lower quarter trim panel.


Hide 26.INSTALL LOWER QUARTER TRIM PANEL RH

HINT:

Use the same procedure described for the LH side.


Hide 27.INSTALL UPPER BACK PANEL GARNISH

a.

Attach the 5 clips and 4 claws to install the upper back panel garnish.


Hide 28.INSTALL CENTER PILLAR GARNISH LH

a.

Attach the guide and clip to install the center pillar garnish.


b.

Connect the front seat belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.

Attach the 4 claws to install the front seat belt shoulder anchor cover.


Hide 29.INSTALL CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 30.INSTALL LOWER CENTER PILLAR GARNISH LH

a.

Attach the 2 clips, 2 claws and 2 guides to install the lower center pillar garnish.


b.

Connect the front seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 31.INSTALL LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 32.INSTALL REAR DOOR OPENING TRIM LH

B276988
2.698,1.396 2.698,1.188 2.698,1.188 2.833,1.188 false 2.875,1.073 3.104,1.333 0.229,0.26 10 false *1 0.531,0.656 0.76,0.917 0.229,0.26 10 false *2 2.906,0.802 3.135,1.063 0.229,0.26 10 false *2
*1 Paint Mark
*2 Mark Position


a.

Align the paint mark on the rear door opening trim with the mark position on the vehicle and install the rear door opening trim as shown in the illustration.


Hide 33.INSTALL REAR DOOR OPENING TRIM RH

HINT:

Use the same procedure described for the LH side.


Hide 34.INSTALL REAR DOOR SCUFF PLATE LH

a.

Attach the 2 clips and 7 claws to install the rear door scuff plate.


Hide 35.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 36.INSTALL FRONT PILLAR GARNISH LH

a.

Attach the 2 guides and 2 clips to install the front pillar garnish.


Hide 37.INSTALL FRONT PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 38.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)

HINT:

Use the same procedure for both front assist grips.


a.

Install the front assist grip with the 2 screws.


Hide 39.INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH (w/ Assist Grip)

HINT:

Use the same procedure for both front No. 1 assist grip plug.


a.

Attach the 2 claws to install the front No. 1 assist grip plug.


Hide 40.INSTALL FRONT NO. 1 ASSIST GRIP PLUG RH (w/ Assist Grip)

HINT:

Use the same procedure described for the LH side.


Hide 41.INSTALL FRONT DOOR OPENING TRIM LH

B276986
2.771,1.458 2.771,1.219 2.771,1.219 2.958,1.219 false 2.979,1.125 3.188,1.333 0.208,0.208 10 false *1 2.604,0.833 2.813,1.042 0.208,0.208 10 false *2 1.385,0.458 1.594,0.667 0.208,0.208 10 false *2
*1 Paint Mark
*2 Mark Position


a.

Align the paint mark on the front door opening trim with the mark position on the vehicle and install the front door opening trim as shown in the illustration.


Hide 42.INSTALL FRONT DOOR OPENING TRIM RH

HINT:

Use the same procedure described for the LH side.


Hide 43.INSTALL FRONT DOOR SCUFF PLATE LH

a.

Attach the 3 clips and 7 claws to install the front door scuff plate.


Hide 44.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 46.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 47.CHECK SRS WARNING LIGHT (w/ Airbag System)