Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE MOULDING
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052839 SIDE MOULDING A

EXTERIOR PANELS / TRIM  SIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL FRONT WHEEL OPENING EXTENSION LH

a.

Install 8 new clips to the front wheel opening extension.


b.

Attach the 8 clips to install the front wheel opening extension.


c.

w/o Front Fender Mudguard:

Install the 7 screws.


d.

w/ Front Fender Mudguard:

Install the 4 screws.


Hide 2.INSTALL FRONT FENDER MUDGUARD LH (w/ Front Fender Mudguard)

Hide 5.INSTALL REAR NO. 1 WHEEL OPENING EXTENSION SUB-ASSEMBLY LH

a.

Install 11 new clips to the rear No. 1 wheel opening extension.


b.

Attach the 11 clips to install the rear No. 1 wheel opening extension.


c.

Install the 5 screws.


Hide 6.INSTALL REAR QUARTER PANEL MUDGUARD LH