Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2013.10
RM1840EF _56 Audio / Visual / Telematics _009632 NAVIGATION / MULTI INFO DISPLAY _0052661 NAVIGATION SYSTEM J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  CD/DVD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.


Result:
Proceed to
No deformation or cracks on the disc
Deformation or cracks on the disc



No deformation or cracks on the disc

2.CLEAN DISC AND RECHECK

Deformation or cracks on the disc

CHANGE DISC

2.CLEAN DISC AND RECHECK
a.
I100151

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.



Result:
Proceed to
Malfunction disappears
Malfunction does not disappear



Malfunction disappears

END (DISC IS DIRTY)

Malfunction does not disappear

3.REPLACE DISC AND RECHECK
3.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one.


b.

Check that the malfunction disappears.


Result:
Proceed to
Malfunction disappears
Malfunction does not disappear



Malfunction disappears

END (DISC IS DEFECTIVE)

Malfunction does not disappear

4.CHECK NAVIGATION RECEIVER ASSEMBLY
4.CHECK NAVIGATION RECEIVER ASSEMBLY
a.

Check the navigation receiver assembly installation condition.

i.

Check that the navigation receiver assembly is properly installed.



Result:
Proceed to
Navigation receiver assembly is properly installed
Navigation receiver assembly is not properly installed



Navigation receiver assembly is properly installed

Navigation receiver assembly is not properly installed