Enter the "Function Check/Setting I" and select "Vehicle Signal".
Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch assembly operation.
| Headlight Dimmer Switch Assembly Condition | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the headlight dimmer switch assembly operation.
| Headlight Dimmer Switch Assembly Condition | Display |
|---|---|
| Tail or head | DIM |
| Off | BRIGHT |
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
| Proceed to |
|---|
| OK |
| NG |
OK
NG